Loading... Please wait...
- Home
- LED Lights
- Auxiliary Brake Light
Customers also viewed
-
$190.00$150.00
-
$90.00$75.00
-
$190.00$160.00
-
$75.00$50.00
Product Description
- Powder coated metal license plate frame with rolled edge helps protect your plate and your motorcycle.
- Multiple leds let the traffic behind you know that you are slowing down. Leds are sealed in a waterproof housing.
- Flash pattern really grabs the attention of drivers. Several flash patterns available, including steady on.
- Your custom message on the frame. Leave us a note at checkout with the text you prefer in quotes "like this"
- Standard version connects with 2 wires (ground (black wire)and brake signal (red wire)). Attaches with 2 posi-tap connectors. The third wire (typically yellow) is for cycling through the different flash patterns. Touch the yellow wire to red to change the pattern.
- Sheathed wire lead 26 inches long.
- Works great with Hex ezcan, Cyclops Raider and many other canbus controllers. Smart brake controller not required for these installations.
- Optional, not required for function of the auxilairy brake light.
- Senses reduction in speed and automatically turns on aux brake. This early warning to vehicles behind you can save lives. Provides a visual cue to others in your riding group.
Product Videos
advmonster.com
-
ADVmonster Aux...advmonster.com
Product Videos
Warranty Information
1 year for manufacturing defects.
Product Reviews
-
does the job
Posted by Don R on 20th Nov 2020
the frame is nice. the light was installed properly and glue placed over the nuts to keep them from vibrating out. wiring harness is plenty long.
my only gripe is the fact you cannot use a normal brake light modulator with it. when I hooked mine up to my airhead GS with a red porter led taillight it only flashed once then went solid. I don't want to spend $40 on a smart controller. it's so bright I don't want it flashing or even solid all the time, like being stopped at a stop light. if you want it to flash you'll have to deal with upsetting drivers behind you and it's kinda pointless to have it solid all the time. especially in california where it's only legal to have 4 flashes then solid. this does do that but it constantly repeats itself. there are several cycles that do grab attention.
(red to power+ black to ground- and tap yellow to power+ to cycle through)
also the option to have something printed on it is nice but it's just a sticker that who knows how long will last. I thought it was printed right on. mine came with ADVmonster logos that were not shown on the pictures.
overall I'd buy it again but now I'm searching for a cheap timer that will keep it on a certain time when brakes are activated. I may be interested in the smart controller if more information was provided for it. -
aux brake light
Posted by Brkr on 9th Sep 2019
Once I figured out how to cycle through the different modes the light works and functions fine. I used the ezcan but the light would not cycle until I hooked it directly to 12v. It would have been nice to have some more instruction on how this is done in the pkg.
-
R1200GS w Ezcan to Be Seen
Posted by mrinstallmac on 22nd May 2019
Works great, used the rear light and brake light functions of the ezan to have the auxiliary brake light run at a reduced output until the brakes are on then full power. Setup the auxiliary brake light to steady on by touching the red wire to the yellow which cycles through the different mode.
-
Awesome for visibility!
Posted by Ben on 24th Apr 2019
I installed this on my 2014 Honda CB500X. Install was straight forward and very easy. The included Posi-Tap connectors made things real easy! The frame is metal and not flimsy, very rugged. The LED's are awesome and very bright! I would highly recommend this as an easy way to help be seen on the road.