The F11 light kit has been superseded by the Model 57FA light kit.
The F11 light kit includes everything you need to install a pair of lights to your choice of mounting location.
Two (2) F11 Led Fog lights.
Plug n Play Wiring harness with your choice of waterproof or handlebar mounted switch.
Light controller / dimmer
About the F11
LED type: Cree XML-U2 LED
Reflector: None, uses optics to shape the light into an elliptical beam pattern.
Housing: Cast aluminum, black powder coat, openings sealed with orings to insure waterproofness.
Mount: The mount locks in place with stainless hardware including nyloc nut. 6mm bolt hole provides a secure mount to your choice of mounting locations. 25mm/1” square mount foot will mount to any flat location or stud. Includes stainless hardware to connect light to your mount.
Size: See drawing
Weight:Approximately 6oz. per light.
Light Performance (single light)
Beam (degrees): 15
Light output (lumens): 1100 single light
Color Temperature (kelvin): 5700
Usable Light (feet/meters): 200 ft with a upper beam cutoff to minimize effect to oncoming traffic.
Power Usage: 1a @ 12vdc
About the wiring harness
Plug n Play: No soldering, crimping or other wire prep required. When purchased with a dimmer, the dimmer will be integrated into the harness. Please leave a note during checkout where you prefer the dimmer be located.
Light Wiring: One meter wire lead with connector. Sheathed lead provides resistance to rubs, scraps and other potential damage while maintaining waterproofness. Adequate length for mounting on lower fork.
LED Control /Dimmer(optional): When purchased with a dimmer, the dimmer will be integrated into the harness. Please leave a note during checkout where you prefer the dimmer be located. The rotary dimmer is typically installed towards the front of the bike on dash or handlebar. The wireless dimmer is typically installed under seat or in a fairing, very flexible installation due to the wireless nature. The bluetooth dimmer is typically installed under seat or in a fairing.
Custom: We can customize the wire lengths to meet your needs. Typically there will be adequate wire, with length to spare.
Switch: Waterproof push button on/off switch. Switch can be panel mounted (3/8" hole) or surface mounted with velcro or double sided tape. Handle bar switch is intended to mount to the handlebar.
1 year from date of purchase to customer of record.
Check our store policies page for detailed information.