Out of Stock
1 M5 LED Spot light with mounting bracket removed.
1 oring for mounting the light in the upper hole of the Trail Tech X2.
Requires removal of the outer plastic cover of the X2 to fit. Optional milled bezel is available that will allow use of outer plastic shield.
Pictures show black plastic mount and screws that are not included. These are taken from your X2 to install the light.
About the M5 LED Light
Pencil/Narron Beam Pattern - 5 degree
Dual Sport X2 requires additional fabrication to mount this light.
Posted by drz400 on 19th Jun 2019
Posted by Ken on 12th Jun 2016
I already have the low beam bulb to replace the low beam on the X2, so adding the high beam only made sense when the stock bulb failed. Replacement was quick, fit was perfect, performance is great and all for a price about the same add the lower performing stock bulb. Two thumbs up!!
I will say that work how well the low beam bulb performs, this one is almost unnecessary. But it is a focused spot, so I actually get fewer people flashing me with this setup.
Give it a try and come join us for the Black Dog night ride next June.
Posted by Andrew on 3rd Aug 2015
I currently have this led in my trail tech x2 HID headlight. This led is pretty bright, but it gives a very narrow beam of light. Its much narrower pattern then the HID bulb it replaced. The led is VERY bright, but i feel its just not the right pattern for riding with. If it was a just a bit wider beam, it would be much much better. I still have the original HID in the lower headlight, and together they are very good combo, but alone the led just doesnt cut it for me. I use the trail tech polycarbonate lense, and the led sticks out a little too far, and i had to file down part of the bulb to get good clearence and a good seal to prevent dust. Overall good product, but its just not 5 stars perfect.